home products services photos contacts

Services.

     REGULATORY COMMISSION BASIS AND METHODOLOGY USED FOR LOW INVASION CORING   

Services
RESEARCH AND TECHNICAL SERVICES 
Prior to the contractual work, geological, geophysical and technological information on the well is gathered. ..

SCOPE OF THE RESEARCH AND TECHNICAL SERVICES TO BE PROVIDED 
Depending on the Clients needs and required final result, the Research and Production Company SibBurMash can offer the following service options for low invasion coring and core analysis ..

MAJOR TECHNICAL PARAMETERS OF CORE BARRELS ACCORDING TO TU 3664-031-27005283-98 
Core barrels are equipped with centralizers, diameter of which is selected depending on the diameter of the core bit to be used ..

REGULATORY COMMISSION BASIS AND METHODOLOGY USED FOR LOW INVASION CORING 
The order of operations on low invasion coring is summarized in Methodic Guidelines for Low Invasion Coring and Core Analysis. ..

NEW PERSPECTIVE TECHNOLOGIES 
Pressurized core is a core obtained with sealed pressurized core barrels which, after the core is separated from the bottom hole, can provide sealing of the core receiver both in the bottom and top (if necessary). ..

The order of operations on low invasion coring is summarized in Methodic Guidelines for Low Invasion Coring and Core Analysis. Tyumen research and development companies SibBurMash, SibCor and Tyumengeophysica are the co-authors of this document and co-performers of the above described operations.

This document was considered, approved and recommended for application by the following agencies:

  • State Commission on Reserves of the RF Ministry of Natural Resources;

  • Central Commission on Development of the RF Mintopenergo;

  • Gosgortechnadzor of the RF;

  • Technical Committee on Standardization of the subsoil exploration;

  • Sub-committee on Research and Design Work of the RF Ministry of Natural Resources.

The above mentioned core barrels are designed and manufactured by SibBurMash who own the following licenses of Gosgortechnadzor of the RF:

  • For the right to design technological systems, equipment, units and mechanisms for well drilling and oil production;

  • For the right to manufacture blowout prevention equipment and technological equipment for well drilling and oil and gas production;

  • For the right to realize justified recommendations, technological regulations, process flow charts, to use equipment and mechanisms for drilling and operation of exploratory and production wells for oil, gas, thermal water, and in subsurface gas storages.



    NPO "SibBurMash", Tyumen, +7 345 247 2584   nposbm@tmn.ru


:: Home :: | Products :: | Services :: | Photos :: | Contacts ::

© 2002 NPO" SibBurMash"
    webcom@mail.ru @Mail.ru